Ultra electronics Turbo User Manual download pdf (Page 20)

Quick Start Guide Ultra Electronics Card Systems

Page 20 MAGICARD TURBO Color Printer

position. A 1% shift is approximately

0.1mm

X Start Position - This function allows the

operator to adjust the position of the start

of the image. A 1% shift is approximately

0.1mm. For interfacing to earlier models,

leave set at the default value of 50, to

prevent file errors.

X End Position - This function allows the

operator to adjust the position of the start

of the image. A 1% shift is approximately

0.1mm. This adjustment only applies to

Full Bleed models. For interfacing to

earlier models, leave set at the default

value of 50, to prevent file errors.

YMC Power - allows the user to adjust the

density of the Yellow, Magenta and Cyan

print. For interfacing to earlier models,

leave set at the default value of 50, to

prevent file errors.

Resin Power - allows the user to adjust

the density of the Black Resin print.

Overcoat Power - allows the user to

adjust the density of the Overcoat print.

For interfacing to earlier models, leave set

at the default value of 50, to prevent file

errors.

Colour Adjust

The default values for the Contrast,

Brightness and color balance of the

printed card may be changed in this setup

tab. Unless you know what you are doing,

avoid changing the defaults.

About

Data on this page is for information only.

When the printer set up selections have

been made, click on the OK button to

close the setup window and to accept any

changes that have been made.

Note: Although you may be able to

access the Printer Setup dialog window

from within a WINDOWS application, with

some applications, the selected settings

will prove to be volatile, and will be lost

when you quit WINDOWS.

Click on the RESTORE button to return to

the original default values.

Click on the CANCEL button to close the

setup window and to abandon any

changes that have been made.

For further information on installing and

configuring printers to your PC, operating

in a WINDOWS environment, consult the

Microsoft WINDOWS User's Guide.

Printing Monochrome Bitmaps

Driver versions 4.01 and later has an

option to print graphics using the resin

black panel of the dye film. To print a

bitmap on the resin black panel the format

must be as a 1 Bit Bitmap image file.

Mag Encoding using the WINDOWS

Driver

If you wish to use the magnetic encoder

from within a WINDOWS application,

create a text string with a tilde (~) symbol

at the beginning and place the string

anywhere on the image, using a black

true type font.

For example, to encode the word

"HELLO" on to Track 1 at 210 bpi on a

HiCo card, the instructions and data string

placed on the image should be:-

~1,BPI210,MPC7,COEH,%HELLO?

The Magicard 300M printer allows you to

encode HiCo and LoCo cards, at 75 or

210 bpi, on any of the three tracks, at 5 or

7 bits per character, with complete

freedom.

To ensure the encoded card is recognised

by the swipe reader the encoded data

must comply with the ISO Standards. For

copies of specifications contact:

American National Standards Institute

11W. 42ND Street

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 36 37

Comments to this Manuals

No comments