Ultra electronics Turbo User Manual download pdf (Page 18)

Quick Start Guide Ultra Electronics Card Systems

Page 18 MAGICARD TURBO Color Printer

Degrees

rotated 180 degrees.

Opposing Rotation Between Sides is only

significant if interfacing to a Magicard Flip

Double-Sided printing model.

Display Popup, when selected will enable

the Magicard printer spooler that normally

is displayed on the bottom right hand side

of the PC VDU when printing.

The number of copies may be set from 1

to 255.

Colour Format / Film

Dye Film Fitted - tells the printer which

type of dye film you have installed. The

dye film supplied with your printer is five

panel UR1 dye film. Leave the default

selection at YMCKO - Resin. Note that

UR8 dye film is only valid for the Magicard

Flip Model.

Page 1 Color Format - tells the

WINDOWS Driver which dye film panels

to use on your card. For printing on the

resin black dye panel leave the default

selection at YMCK - Resin Black. For a

simple color image select YMC-Composite

Black.

Page 2 Color Format - applies only to

Magicard Flip models.

Black to YMC and K - this option when

selected will enable the printing of the

resin black panel over the top of the YMC

panels, this will enable masked barcodes

to be printed. Care should be taken to

ensure that the background colour is in

the range of 0 to 254 otherwise if the

value of 255 is used (full black) the YMC

panels will be skipped and only K will be

printed.

Black to K Only - this option when

selected will enable the printing of objects

such as lines, rectangles and graphics

providing they are in a full black value of

255, should a value of 254 or lower be

used the YMC panels would be used to

create the black. This option should NOT

be used if a coloured background is being

used on the card, as white lines may be

present around the edge of the graphics

or objects. To print objects using the resin

K panel Black to YMC and K should be

selected, this will enable a coloured

background to be used with the resin

black printed on top.

Overcoat

Page 1 - Overcoat check box can be

used to turn overcoating on and off.

Page 1 - Ultra Secure check box can be

used to turn this security feature on and

off. An Ultra Secure key must of course

be fitted if a CUSTOM feature is required.

Page 1 - Overcoat Areas/Windows can

select the options for specific areas of the

card to be overcoated, or for windows to

be left in the overcoat (up to five in each

case). Overcoating is a 2.5 micron layer of

transparent acrylic protection that is

available with some types of dye film (For

example the "O" in "YMCKO" dye film).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 36 37

Comments to this Manuals

No comments