Ultra electronics AND GTAX 550 User Manual download pdf

OPERATING INSTRUCTIONS

ULTRA GTA 500, GTAx 500, AND GTAx 550

DETECTORS

The control panels of these detectors have seven (7) touchpads which control all the operating

functions of the detector. Beneath the Arm Cuff are the Battery Pack and the headphone jack.

TOUCHPAD CONTROL FUNCTIONS:

Power: Turns the detector on, off, or resets the detector to the factory settings.

Press once to turn the detector on.

As the detector starts the battery condition is checked audibly and displayed on the LCD

Display. Also, during the detector's start-up the detector adjusts automatically for the

elimination of ground minerals, and the audio threshold is set to a point that is just silent. The

last used pattern of discrimination is re-established and displayed on the LCD face.

Set Depth: (Also referred to as sensitivity). Permits the regulation of depth/sensitivity using the

+ and - touchpads.

Set Audio: Permits the regulation of the Audio Threshold using the + and - touchpads.

Set Disc: (Discrimination): Permits the regulation and/or adjustment of the discrimination

pattern by turning on and off target cursors on the lower LCD bar which shows the items to be

rejected or accepted as targets.

Pinpoint: Activates the Pinpointing function and causes the depth of coin-sized items to be

shown on the Lower Scale.

Last Mode: Switches operation between operating modes A and B.

+ and - Arrows: Used to move the Target ID cursor when setting the discrimination notches.

These arrows are also used when adjusting the Depth/Sensitivity, and Audio Threshold levels.

Special Note:

If you are ever unsure about the settings of your detector, simply

press and hold the Power

touchpad for approximately 10 seconds. The detector will emit an audio signal and the factory

default settings will be restored.

Graphic Display Information:

Above the LCD Display is a guide of targets for use with the Target Cursor to assist in the

identification of detected items.

Note: All metal items will be indicated on the display but only

those that correspond with segments which are turned on will give an audio response.

1 2 3 4 5 6 7

Summary of Contents

Page 1 - DETECTORS

OPERATING INSTRUCTIONS ULTRA GTA 500, GTAx 500, AND GTAx 550 DETECTORS The control panels of these detectors have seven (7) touchpads which contr

Page 2 - OPERATING INSTRUCTIONS:

The Upper Scale of the LCD indicates the target found, and the setting levels of the Depth and Audio modes. This scale indicates the maximum Pinpoint

Page 3 - OPERATING ADJUSTMENTS:

location. Listen for the loudest, most pronounced audio signal. The Target ID Cursor will indicate the target's probable identity on the Display.

Page 4 - MAINTENANCE

Another way to change the discrimination pattern is to search as normal and when an unwanted target is encountered, press the "Set Disc" Tou

Page 5 - REPAIR SERVICE

 Always remember that your detector is a sensitive electronic instrument. It is built to withstand rugged treatment in the outdoors. Use your Garr

Page 6 - WARNING!

 Please allow approximately one week for Garrett technicians to examine and repair your detector after they receive it, plus another week for return

Page 7

 Avoid striking any line known to be or suspected to be carrying electrical power.  Do not disturb any pipeline, particularly if it could be carr

Comments to this Manuals

No comments

Ultra electronics AND GTAX 550 User Manual

Browse online or download User Manual for Measuring, testing & control Ultra electronics AND GTAX 550. Ultra ElectronicS AND GTAX 550 User's Manual

Summary of Contents

Comments to this Manuals